After successfully setting up the Wavlink AC1200, you can easily enhance your wireless network at home or in the office. Its compact size allows for easy installation, and its simple design seamlessly integrates with your existing decor.
With the Wavlink AC1200 wireless range extender, you can effortlessly extend the range of your current wireless network from anywhere in your home. Equipped with four high-performance antennas in an omnidirectional configuration, it improves the performance and reliability of your network. The extender wirelessly connects to your router and monitors and enhances the router's signals in real-time, ensuring a seamless experience for all your devices.
Here are the steps for setting up the Wavlink AC1200 extender:
- Connect the power adapter to a nearby power socket and check all the wires for proper insulation.
- Look for a steady blue light on the extender to confirm it's turned on.
- Press the WPS button on your router and the WPS button on the extender simultaneously to link them within two minutes.
- Check the signal LED on the extender to ensure it has turned solid blue, indicating successful connection.
- Proceed to the next stage of the Wavlink AC1200 configuration.
- Once located, the extender will boost your network, and the SSID and password for the extended and conventional networks will be the same.
- Log in with your current password to complete the setup.
Alternatively, you can also connect to the Wavlink AC1200 extender via a web browser using the following steps:
- Connect the AC1200 extender to a power outlet.
- Configure the extender to repeat by accessing your laptop or tablet's WIFI settings and joining the Wavlink-N network.
- Launch a web browser such as Google Chrome, Mozilla Firefox, or Microsoft Edge.
- Type wifi.wavlink.com or 192.168.10.1 in the address bar and press enter.
- Follow the on-screen instructions to connect the extender to your home network.
If you encounter any issues with the Wavlink AC1200 setup, you can troubleshoot by checking the following:
- Some routers may have the WPS button disabled by default on the IP 192.168.10.1 gateway. In such cases, you can configure the extender through the Wavlink extender setup management website.
- Ensure that the extender is located near your wireless router for optimal performance, maintaining a distance of one meter between them.
- Keep the extender away from electronic devices that may cause interference, such as Bluetooth gadgets, baby monitors, microwave ovens, and cordless phones.
To set up the Wavlink AC1200 as an access point, follow these steps:
Setting up the Wavlink AC1200 as an access point is a simple process that involves a few straightforward steps:
Access the Wavlink AC1200 configuration page by entering "wifi.wavlink.com" or "192.168.10.1" in the address bar of your web browser.
Choose your country/region and time zone from the drop-down menus on the configuration page.
Create new login details for your web interface page, following the on-screen instructions.
Select the "Access Point" working mode from the configuration options.
Choose the wireless network of the primary router to which you want to add the extender.
Enter the same Wi-Fi password used for your home router for your Wavlink AC1200 extender.
Allow some time for the settings to take effect.
Find the name of your Wavlink AC1200 access point's wireless network and connect to it using the Wi-Fi password.
Once the configuration is complete, you can place the Wavlink AC1200 access point wherever you want.
It's important to note that you may need to enter the default login password the first time you access the Wavlink web interface. If you encounter any issues or need further assistance, you can contact Wavlink's expert team via our toll-free number +18777780205 or live chat, available 24/7. visit website at wirelessextendersetup.org
Comments