Skip to main content

How to Setup WiFi Extender TP-Link

 In this blog, we'll walk you through the process of setting up your TP-Link WiFi Extender using either the Ethernet or WPS method. Follow the instructions below to install your extender successfully:

TP-Link WiFi Extender setup

TP-Link WiFi Range Extender Setup - How to Connect with Router-


There are two methods for setting up the extender: the manual method using an Ethernet cable, and the WPS method. Both methods are described below, so you can choose the one that works best for you.


TP-Link WiFi Extender Setup Manual Method (With Ethernet Cable)-

To begin the TP-Link WiFi Extender setup with an Ethernet cable, connect the extender to your computer using an Ethernet cable, and then follow these steps:


  1. Power on your TP-Link WiFi extender.

  2. Connect it to your computer using an Ethernet cable.

  3. Open any web browser and type "192.168.0.254" in the URL box to access the TP-Link web page.

  4. Select quick setup and then click on next.

  5. Choose your region and then click on next.

  6. The TP-Link extender will search for wireless networks. This process may take a few minutes.

  7. Look for your wireless network in the list and select it.

  8. Enter the wireless password when prompted.

  9. Choose "copy from the main router" to create a single, larger wireless network, or select "customize" to create a different network.

  10. Click on next.

  11. Review the network settings on the final window and click on finish if everything is correct.


Once the process is complete, the TP-Link extender will reboot and you will be able to access the internet. You can then test the connection using an Ethernet cable or wireless mode.


If you are looking for a TP-Link WiFi Extender setup with an Ethernet cable, simply follow the above steps.


TP Link WiFi Extender Setup With WPS Button (Without Ethernet Cable)-

You can use the "WPS" button located at the back of your router to complete the setup process. Follow these steps:

  1. First, power on your device.

  2. Then, activate your router by pressing its power button.

  3. Press and hold the WPS button on the router.

  4. Simultaneously press the WiFi button on the extender as soon as you press the WPS button on the router. Check if the LED light on the extender is glowing to ensure successful setup.

  5. If the connection fails, it indicates that the wireless signal is turned off. 

  6. On the other hand, if the wireless signal is visible, it means that the connection has been successfully established.

With this, the TP Link WiFi extender setup without an ethernet cable is complete. You can now place the extender in your preferred location.


How to Access 'TP Link Range Extender After Setup'

After completing the TP Link WiFi Extender setup, you can access the settings management wizard through the web by following these steps:


  • Open a web browser on your computer or smartphone and enter the default IP address, which is 192.168.0.254, in the address bar. Then, press "Enter".

  • This will redirect you to the Extender Login Wizard, where a login form with fields for username and password will appear on the screen.

  • In the username field, enter "admin" and in the password field, enter "admin". Then, click on the "Login" button.

  • The TP-Link extender login wizard will verify the details and log you into the extender management wizard.

  • Once the TP Link Range Extender setup is complete, you can change the existing setup page.

It is important to check certain essentials before setting up the TP Link Extender to avoid any problems during the setup process. 


These steps are easy to follow and will help you set up and configure your TP Link WiFi Extender. Be sure to follow them carefully to complete the process of TP Link WiFi Extender setup with WPS and without an ethernet cable. If you need any guide assistance for the setup process then you can contact our expert team they will assist you. 
Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

How to set up Wavlink AC1200 WiFi Extender

  After successfully setting up the  Wavlink AC1200 , you can easily enhance your wireless network at home or in the office. Its compact size allows for easy installation, and its simple design seamlessly integrates with your existing decor.   With the Wavlink AC1200 wireless range extender, you can effortlessly extend the range of your current wireless network from anywhere in your home. Equipped with four high-performance antennas in an omnidirectional configuration, it improves the performance and reliability of your network. The extender wirelessly connects to your router and monitors and enhances the router's signals in real-time, ensuring a seamless experience for all your devices.     Here are the steps for setting up the Wavlink AC1200 extender:   Connect the power adapter to a nearby power socket and check all the wires for proper insulation. Look for a steady blue light on the extender to confirm it's turned on. Press the WPS button on your router...
Post a Comment
Read more

How to Reset Linksys Extender

  Linksys Extender is a device that is used to extend the range of your wireless network. Sometimes, you may experience issues with your Linksys Extender, such as a weak signal, inability to connect, or slow internet speed.  Comment Linksys Extender reset In such cases, resetting Linksys Extender can help to resolve these issues. In this article, we will discuss why we need to reset Linksys Extender, common issues that can be resolved by resetting, troubleshooting, the hard reset process, and the soft reset process. Why do we need to reset Linksys Extender? There are several reasons why you may need to reset your Linksys Extender. The most common reasons are: Network Issues: If you are experiencing issues with your wireless network, such as a weak signal or inability to connect, resetting your Linksys Extender can help to resolve these issues. Firmware Issues: If your Linksys Extender is not functioning properly due to a firmware issue, resetting it can help to resolve the iss...
Post a Comment
Read more

How to setup MSRM WiFi Extender

  Are you looking for information on how to Setup MSRM WiFi extender ? Are you having trouble configuring the MSRM? Do you want to be able to use your high-speed internet connection throughout your home or office, even in dead zones? Don't be alarmed if you answered yes to any of these questions! You've arrived at the right place. This guide contains simple and straightforward instructions for configuring an MSRM WiFi extender. Let's get started on the setup process right away. Following the Easy Steps on MSRM WiFi Extender setup- Step 1:First, use the included connector to connect your MSRM WiFi range extender to an electrical outlet. Turn on the device that serves as an extension. Step 2: Next, navigate to the WiFi selection screen using your wireless device, such as a laptop, mobile phone, tablet, or other similar device. From the drop-down menu, select the MSRM option. Step 3: Next, launch your preferred web browser and begin browsing the internet. To begin, enter the I...
Post a Comment
Read more